Configurable and airtight supply and exhaust spigots, suitable for horizontal and vertical installation.Minimum outdoor temperature -10ºC. For lower temperatures it is necessary to use preheating batteries located in the suction of the outside air.ApplicationsCommercial premises, offices, restaurants, public buildings, schools.CADB/T-HE D ECOWATTHeat recovery units without additional incorporated heater.CADB/T-HE DC ECOWATTHeat recovery units with built-in hot water coil.The 3-Way valve is provided as an accessory (see accessories table for this series)CADB/T-HE DI ECOWATTHeat recovery units with built-in electric heater battery.MotorsModels 04 to 33: EC motors with integrated electronic protection, IP44, Class B.Models 45 to 100: three phase EC motors, IP54 Class B.FansPlug-fan with backward curved impeller.Filters- F7: Low pressure F7 filters (ePM1 70%) for supply air.- M5: M5 filters (ePM10 50%) for extract air.- Possibility of mounting a second filter (accessory).Two pressure switches DPS 2.30 to control the filter pollution are provided with the unit.It is possible to complement the heat recovery unit with a specific range of water and direct expansion coils. Also available, the exclusive module IAQ with high efficiency VOC's and particles filtration that guarantees the filtration and purification of the outdoor air.Additional informationBy-pass electrical supply (1/230V 50Hz) can be actuated by means of a 3 position switch.Electrical battery supply (1/230V 50Hz) for models 04 to 16, three fase (3/400V 50Hz) for sizes 21 to 100.Nominal airflows from 450 to 10.000 m3/h.All versions and models include by-pass.Mounting flexibility provided by the interchangeable side panels.
