Bathroom Extract Fans

In-line Duct Fans

Central exhaust fans

Central systems

Decentralized systems

Brofer Pura accessories

Ventilators

Dehumidifiers

Humidifiers

Air purifiers

Hair dryers

Heating

Kitchen hoods

Built-in duct fans

Fans in acoustic cabinets

Fans for installation on the roof

Compact devices

Modular devices

Fire dampers

Smoke exhaust flaps

Air curtains

Grids

Diffusers

Regulation

Insulation

Slovenščina (Slovenija)Slovenščina (Slovenija)
Slovenščina (Slovenija)Slovenščina (Slovenija)
English (United Kingdom)English (United Kingdom)

THGT.

Range of adjustable pitch aerofoil blade, cased axial flow fans designed for smoke extract in fire conditions and certified F400-120, F300/F200-120 (CE marked).
Deli
Casings formed from rolled sheet steel with a corrosion resistant hot dip galvanised finish for all models.All models F400-120 except 2 poles incorporate separate high grade diecast aluminium blades locked within an aluminium injected hub (diameters from 400 to 630) or a pressed sheet steel hub.(diameters from 710 to 1600).F300/F200-120 models incorporate an aluminium injected hub (diameters from 400 to 800) or a pressed sheet steel hub.(diameters from 900 to 1600).2 POLES F400-120 model with aluminium impeller / hub formed from a one piece casting.All models are available in both short and long casing versions except 2 poles F400-120 model only supplied with long casing.Short casing versions: (C) Standard (CK) Includes an external terminal box for ease of connection.Long casing versions: (LK) Includes an external terminal box for ease of connection, and a spy phole to check impeller rotation. (LP) Includes an inspection door for easy access to motor. (LPK) Includes both external terminal box and inspection door.Suitable for horizontal or vertical mounting installation.Check EasyVent to select the most suitable configurations for the installation, and obtain the corresponding datasheets.Soler&Palau Sistemas de Ventilación SLU certifies that this model is licensed to bear the AMCA Seal for Air Performance. The revision version is EasyVent v11, May 2020. Certification may be checked at AMCAMotorsAvailable, depending upon the model:- with three phase motors in 2, 4 or 6 poles.- with three phase two speed motors, 2/4,4/8, 4/6 or 6/12 poles.F300-120 & F400-120 motors are IP55, class H insulation.Electrical supplies: Three phase 230/400V-50/60Hz* up to 3 kW. Three phase 380/415V-50Hz, for higher power motors and two speed motors. (See characteristics chart). (*60Hz versions available in EasyVent).Motors suitable for inverter control.In emergeny operation, no need for DOL or de-rating, as long as the VFTM range of VSds is used, and/or requirements defined in EN 12101-3 are followed.On requestCasing in stainless steel or paint finish.Motors provided with PTC thermistor or space heaters.
installation AXIAL ATEX FANS